ie
de en fr hu ie pl ro ru se uk
Choose by category
Demand controlled ventilation (DCV) - installation of air inlets in living room
Air inlets
Exhaust units
Exhaust fans
Heat recovery units
Ducting & Accessories
Exhaust Fans with heat pump
Non residential systems
Sensors
Canopies and inlet channels
Choose by system
Individual mechanical exhaust ventilation Collective mechanical exhaust ventilation Heat recovery ventilation Exhaust fans with heat recovery Hybrid ventilation Natural Ventilation
Choose by name or reference
Détecteur de

S-PRE/DAY-NIGHT/T

OCCUPANCY SENSOR WITH LIGHT AND TEMPERATURE SENSOR FOR MODBUS COMMUNICATION

Occupancy sensing for better comfort & energy efficiency

One of the biggest challenges, that we are encountering today is the balance between comfort, security and the efficiency of energy. When it comes to occupants’ comfort in an indoor area, both residential as well as non-residential markets, the building constructors are providing a best in class experience for the occupants with well-equipped building automation solutions.

Indeed, the occupancy sensors helps to control different types of appliances such as ventilation, air conditioning, alarms etc… according to the presence of the occupants inside the building. This provides many benefits such as low energy consumption, less carbon dioxide emissions, life-span extension of devices and decrease in electricity cost.

  1. Home
  2. Products
  3. Sensors
  4. S-PRE/DAY-NIGHT/T
CONTACT-US

3-in-1 device (Occupancy, light and Temperature)


Energy saving


Smart design (extra flat)


Accurate device to detect presence and motion


Day-Night detection


Compact design, simple to install, ready to use


Modbus communication


Networkability up to 15 sensors


No maintenance


Description
Characteristics
Schematic
Gallery
Documents

Easy connectivity and data transfer

The S-PRE/Day-Night/T sensor is equipped with a Modbus interface, which provides easy setup and integration into large process control and automation systems. Indeed, the sensors measurements can be read in real-time over RS485 local network via the Modbus RTU protocol with Master-slave approach. 

The S-PRE/Day-Night/T acts as a slave, and it allows for building network of up to 15 slaves. Moreover, the data of S-PRE/Day-Night/T is accessible via the Modbus register table.
 

Presence/Motion:

The pyroelectric detector with a 31 pairs of facets Fresnel lens, concentrates the infrared radiation emitted by human body and divides the detection field into 62 zones. It has a 4 meters of detection distance, 6 meters of diameter of detection on the floor and a 100°angle of detection.

Light:

The built-in light sensor detects the level of light intensity in the area, which helps to identify the light and darkness in order to optimise the occupancy sensing.

Temperature:

The built-in temperature sensor can be used for monitoring the temperature level in a zone.

Occupancy sensor with light and temperature sensor for Modbus communication S-PRE/DAY-NIGHT/T
Standard code CAP1669
Data points Presence /motion,Light and temperature (built-in sensors are not fully usable)
Occupancy sensor specifications  
Sensor Type Pyroelectric
Number of facets 31
Detection angle 100 degree
Detection distance 4 meter
Diameter of detection on the floor 6 meter (for 2.7m ceiling height)
Built-in light sensor  
Output Light* and Darkness**
Response time @1fc (ms, typ.) >500 ms
Built-in temperature sensor  
Temperature working range 2°C to 50°C
Accuracy 0.5°C ensured at 25°C
Conversion Gain 10mV/°C
LED indicators Yellow LED for Modbus traffic indicator Red LED for presence indicator
Electrical specifications  
Power supply 12 VDC
Power consumption (standby mode) 2mA Max
Power consumption (detection mode) 3mA Max
Connection type 2xRJ45 shielded
Operating and storage temperature 0°C to 100°C
Communication  
Protocol type Modbus RTU, RS485 physical layer
Baud rate 9600bps
Data length 16bits
Housing  
Material ABS
Color white
Protection IP 20
Weight 34 g
Installation type Ceiling, indoor

*« Day »: detection of the presence of light (naturel light or artificial light)
**« Night »: detection of the absence of light (absence of naturel light or artificial light)

DIMENSIONS IN MM

S-PRE/DAY-NIGHT/T

Installation instructions - Occupancy, day/night and temperature modbus sensor - TF6582_A
S-PRE/DAY-NIGHT/T

Register table - Occupancy, day/night and temperature modbus sensor - FLY704GB_v1
S-PRE/DAY-NIGHT/T

Booklet - Occupancy, day/night and temperature modbus sensor - FLY694GB_v1
Compatible ventilation systems:

Mechanical exhaust ventilation – MEV – collective treatment

Mechanical exhaust ventilation with heat recovery – MEVHR
Similar products

S-CO2/T - Sensors

CO2 and temperature sensor for Modbus communication

Nowadays, the buildings are nearly air-tight, entailing a risk of poor indoor air quality if there is a lack of ventilation. Indoor air quality can generally be assessed by measuring the concentration of carbon dioxide, known to be representative of indoor air conditions. Aereco introduces the new S-CO2/T Modbus, an effective CO2 sensor specially designed to accurately assess indoor CO2 concentrations, in order to help systems optimize indoor air quality.

S-VOC - Sensors

VOC sensor with digital and analog outputs

Indoor environments contain various gases and microscopic particles that can impact human health. The S-VOC is designed to accurately and reliably determine the level of volatile organic compounds (VOC), typically associated with cigarette smoke, cooking smells, and other pollutants.

S-CO2 - Sensors

CO2 sensor with digital and analog outputs

Most new buildings in developed countries are nearly air-tight, entailing a risk of poor indoor air quality if there is a lack of ventilation. Indoor air quality can generally be assessed by measuring the concentration of carbon dioxide, known to be representative of indoor air conditions.

S-RH/T - Sensors

Relative humidity and temperature sensor with digital and analog outputs

The S-RH/T is designed for applications such as demand-controlled ventilation and air conditioning where accurate measurements, excellent long-term stability, and maintenance-free operation are absolute musts.

S-SERIE - Sensors

Indoor air quality sensors with digital and analog outputs

Aereco introduces its new range of sensors to measure the concentrations of CO2, VOCs and humidity to control buildings HVAC system.

×

Your personal data are collected in order to be able to respond to your contact request and your questions. They are kept for the period strictly necessary for the processing purposes for which they have been collected and in accordance with the applicable legislation. You can exercise your rights at any time by contacting: [email protected]. For further information on our privacy policy, please visit our website.

Looking for a distributor, needing a quote or requesting information on a product…?
Please contact directly the distributor of your area or use the form below for your question.


* Required Fields